Home / News / What to pay attention when operating fiber laser welding machine

What to pay attention when operating fiber laser welding machine

Views:6     Author:Site Editor     Publish Time: 2021-06-11      Origin:Site

The fiber laser welding machine is a high-quality laser welding equipment. Its use has rapidly improved work efficiency. Now the application field is becoming wider and wider. When using the fiber laser welding machine, everyone must operate in accordance with the specified requirements. In order to avoid problems, today I will give you a specific introduction to what you should pay attention to when operating the fiber laser welding machine.

 02

1. When using the fiber laser welding machine, do not put coins or screws on the outside or inside of it. This will easily cause short-circuit accidents, which will damage the fiber laser welding machine.

 

2. For the switch and button of the fiber laser welding machine, do not operate continuously. You only need to press it once each time you use it. If it is repeatedly turned on and off, it will also affect its service life. It will cause it to malfunction in a short time and affect normal work.

 

3. When using the fiber laser welding machine, you must gently operate the button with your hand. Do not use a screwdriver or other tools to touch the button. This is easier to damage the button. In addition, do not use sharp objects to touch it. This will cause permanent damage to the touch screen. You must use a special touch pen or use your fingers to operate the touch screen.

 01

4. Between the fiber laser welding machine and the control box, use a connecting wire to connect. If you disassemble it and use it again, you must ensure that all the connecting wires have been restored, but you can't let the connecting wire block the optical fiber; At the same time, use a laser shield interlock switch that meets the requirements. When operating the fiber laser welding machine, you must pay attention to the above precautions. At the same time, when starting the machine, you must follow the safety instructions that meet the requirements. In order to prevent fires, do not allow the laser to irradiate easily combustible materials. , For welding specified workpieces, it cannot be used for other ways. In addition, maintenance and maintenance work must also be done at ordinary times.


Hot Sale

FLATBED LASER CUTTING MACHINE

FLATBED LASER CUTTING MACHINE

Portable Laser Marking Machine

plit portable fiber laser marking machine

Fully Protection Laser Cutting Machine

Fully Protection Laser Cutting Machine

CO2 Laser Cutting Machine

CO2 laser engraving machine

Dual-Use Fiber Laser Cutter

Dual-Use Fiber Laser Cutter

Handheld Laser Welding Machine

Hand-held laser welding machine

CONTACT US

Contact Us

Hot Product

Contact Us

  Private Industrial Park, Yu Huang Miao Town, Shanghe, Ji’nan, Shandong
  +86 18560200330
 

Quick Links

Copyright © 2020 Shandong iGOLDEN CNC Technology Co., Ltd.  All rights reserved. sitemap