Processing Of Fiber Laser Tube Cutting Machine

Views: 0     Author: Site Editor     Publish Time: 2022-06-29      Origin: Site

Invisible beam laser cutting is used instead of the traditional mechanical knife, with high precision, cutting fast, not limited to the cutting pattern restrictions, automatic layout saving material, cut smooth, low processing costs will gradually improve or replace the traditional metal cutting equipment. Laser knife head of mechanical part and artifacts no contact, in work in the not on artifacts surface caused designated injury; laser cutting speed fast, incision smooth flat, General without follow-up processing; cutting hot effect district small, plate deformation small, cut sewing narrow (0.1mm~0.3mm); incision no mechanical stress, no shear Burr; processing precision high, repeat sex good, not injury material surface; NC programming, can processing any of plane figure, can on format is big of whole Board cutting, without open mold, economic province Shi.

03

Based on the intelligent scenarios of the metal processing industry,IGOLDENCNC realizes the interoperable leap from ultra-high power to ultra-large and ultra-long format; from single platform to exchange platform, from metal cleaning to welding, depending on the customer's application industry and construction environment. Customers provide tailor-made personalized metal processing intelligent solutions.

管材详情-2_13

The main advantages of high-power fiber laser tube cutting machine:

Faster cutting speed, higher production efficiency, help customers get more orders.

Thin plates can be cut with air, saving more gas costs.

The better cutting effect, less slag/burr, brighter surface.

The scrap rate is much lower than that of low power, which can save customers more plates and reduce production costs and waste.

Fiber laser tube cutting machine Application Field

1.Application Materials: Fiber Laser Cutting Equipment is suitable for metal cutting with Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy Steel Plate, Spring Steel Sheet, Iron Plate, Galvanized Iron, Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal Plate, Tubes and Pipes, etc


2.Application Industries: fiber laser tube cutting machine are widely used in manufacturing Billboard, Advertising, Signs, Signage, Metal Letters, LED Letters, Kitchen Ware, Advertising Letters, Sheet Metal Processing, Metals Components and Parts, Ironware, Chassis, Racks & Cabinets Processing, Metal Crafts, Metal Art Ware, Elevator Panel Cutting, Hardware, Auto Parts, Glasses Frame, Electronic Parts, Nameplates


Laser is the use of material excitation to produce light, this light has a strong temperature. When contacting the material, it can quickly melt on the surface of the material to form a punch, and form a cut according to the movement of the alignment and point. Therefore, compared with the traditional cutting method, such a cutting method has a smaller gap, can save most of the materials, and is environmentally friendly. The fiber cutting machine has less waste, low noise, clean and pollution-free, which greatly improves the working environment.


 Copyright © 2020 Shandong iGOLDEN CNC Technology Co., Ltd.  All rights reserved. sitemap  | Privacy Policy