iGCL  

HAND-HELD LASER CLEANING MACHINE

INTRODUCTION

Hand-held laser cleaning machine uses high-frequency and high-energy laser pulses to irradiate the surface of the workpiece, so that the surface oil, rust or coating evaporates or peels instantly. Its characteristics are not to damage the part matrix, no consumables, energy saving and environmental protection, and efficient removal of resin on the surface of the workpiece. Oil stains, stains, dirt, rust, coatings, coatings, and paints meet the cleaning requirements of complex shapes and fine positioning in the industrial processing field, and achieve higher cleanliness cleaning effects and lower overall cost production benefits. Mainly used in automobile manufacturing, mechanical processing, electronic processing, cultural relics restoration, mold industry, shipbuilding industry, food processing industry, petrochemical industry processing, petrochemical industry and other industries.

EQUIPMENT PARAMETER

Item No. iGCL
Laser Power 100w 200w 300w 1000w 1500w 2000w
Laser Wavelength 1064nm 1080±5nm
Pulse Energy 1.5mJ 12mJ 15mJ 1.5-20mJ
Fiber Length 5m (Optioned) 8-10m (15m Optioned)
Laser Cleaning Head Weight <1kg 3kg
Scanning Width 10-80mm
Voltage 220V, 50/60Hz 380V, 50/60Hz
Cooling Method Air-cooling Water-cooling
Working Temperature 0-40℃ 10-40℃
 

COMPARISON OF LASER CLEANING MACHINE AND TRADITIONAL CLEANING

TRADITIONAL CLEANING

In the fields of petroleum, chemical industry, steel, electric power, etc., due to the production, transportation, storage, installation, and production of new equipment and pipelines, it is inevitable to produce oil, welding slag and various cyanides. Polymers, scale, deposits, rust and corrosion will also be produced. In order to prevent major safety accidents such as leakage and explosion, industrial cleaning is a necessary method. However, there are also some problems in the commonly used centralized industrial cleaning methods.

 Mechanical friction cleaning method: high cleanliness, but easy to damage the substrate. 

 Chemical corrosion cleaning method: stress-free cleaning, but large pollution. 

Liquid-solid jet cleaning method: higher flexibility, but high cost, and more complicated waste liquid treatment. 

High-frequency ultrasonic cleaning method: The cleaning effect is good, but the size of the cleaning parts is limited.

MODERN LASER CLEANING

Laser cleaning machine technology is widely used as a green and environmentally friendly cleaning method. Compared with traditional industrial cleaning, it has the following advantages and becomes an emerging laser cleaning technology, which is widely used in automobile manufacturing, electronic processing, mold industry, petrochemical industry, etc. industry.

 No consumables, no chemical pollution, no noise, energy saving and power saving. 

 No contact, no grinding, no stress, little damage to the substrate.  It can eliminate polluting particles below the nanometer level, and the cleanliness is high. 

Optical fiber transmission, movable operation, can clean dead corners. 

Synchronous cleaning and synchronous processing to achieve zero emissions during the cleaning process. 

 It can realize rapid cleaning of heavy pollutants and high-speed cleaning of light pollutants.

SAMPLE DISPLAY

FIBER LASER for LASER CLEANING

  • The quality of the laser determines the quality of the handheld laser cleaning machine.

The service life is more than 10w hours, the energy consumption is small, the failure rate is low, the flexible optical fiber is 5-20m, it is flexible and convenient, it can realize outdoor welding, and it is equipped with a rigid protective layer.

HANDHELD LASER CLEANING HEAD

To solve the limitation of the worktable's stroke space, touch switch control, integrated design, compact structure, and ready to use when powered on.

The gun head is made of aluminum profile, with good shockproof effect and high stability.

The front support frame can be equipped with dust removal pipes to achieve precision and clarity.

The light width and galvanometer speed can be adjusted directly through the button.

TAIWAN MEANWELL POWER

Ensure the stable operation of the handheld laser welding machine, more safe, prolong the service life of the laser welding equipment.

S&A WATER CHILLER

The special water cooling machine for fiber laser welding machine, ensures the stable operation and safety of the laser welding equipment.

ERGONOMICS OF HANDHELD LASER CLEANER

Optical fiber coiling area, touch screen panel, botton control, side-opening cabinet door, universal wheel with lock, integrated main cabinet, heat dissipation air duct, the handheld fiber laser cleaning machine will be more convinient and easy to operation.

APPLICABLE MATERIALS

caizhi
MATERIALS
4-cut
   CUT   
4-engrave
ENGRAVE 
4-marke
  MARK  
4-weld
 CLEAN
Stainless steel      
Carbon steel      
Aluminum      
Copper      
Galvanized sheet      
Gold      
Silver      
Nickel plate      
Manganese plate      

CLEANING PERFORMANCE TABLE

/Note: The following performance parameters are standard test data. Due to the complexity of the actual application, the data will vary.

Substrate

Surface

Effective focal 

depth (mm)

Standard cleaning 

efficiency (mm/m)

High-speed cleaning 

efficiency (mm/m)

Effect

Cast iron

Severely corroded 

0.08mm

>35

2000

3000

The surface is clean and the

 substrate is not damaged

Carbon steel plate

Moderate rust

0.5mm

>40

1800

2400

Stainless steel

Surface oil, 

slight rust

>50

2000

3000

Mold copper gear

Moderately oily, 

with iron filings attached

>45

2000

2300

Aluminum plate

Oxide, 

surface fouling

>35

2000

2300

CONTACT US

Contact Us

Hot Product

Contact Us

  Private Industrial Park, Yu Huang Miao Town, Shanghe, Ji’nan, Shandong
  +86 18560200330
 

Quick Links

Copyright © 2020 Shandong iGOLDEN CNC Technology Co., Ltd.  All rights reserved. sitemap