Model | iGR-F 3015 | |
Working area | 3000*1500mm | |
X axis stroke | 1500mm | |
Y axis stroke | 3000mm | |
Z axis stroke | 120mm | |
Accuracy | X, Y axis positioning accuracy | 0.03mm |
X, Y axis repositioning accuracy | 0.02mm | |
Speed | X, Y axis max. running speed | 180m/min |
X, Y axis max. accelerated speed | 2G | |
Power supply | Phase | 3 |
Nominal voltage | 380V | |
Frequency | 50/60Hz | |
Protection grade | IP65 | |
Machine body | Max. working loading | 1000kg |
Body weight | 2000kg | |
Size(L*W*H) | 4410*2500*2200mm | |
Laser power | 500w/ 750w/ 1000w/ 1500w/ 2000w/ 3000w/ 4000w/ 5000w/ 6000w/ 8000w/ 10000w/ 12000w | |
Worktable optional | 4000*1500mm/ 4000*2000mm/ 6000*2000mm/ 6000*2500mm |
The square tube welding bed is welded with a thick rectangular tube with a diameter of 200*200mm. The bed weight can reach 1T. The bed body is annealed and milled by a large gantry to accurately drill all installation basic holes at once.
Higher tensile strength and dimensional stability. Effectively improve the accuracy of the bed, reduce the processing error of the workpiece. Increase the resistance and stability of the guide rail.
It reduces the loss of the equipment when it is used. It keeps the precision of the cheap laser cutter for a long time and does not deform for 20 years. The affordable laser cutter has good stability and reduces the processing errors caused by the vibration of the bed.
High precision. After manual aging, solution treatment and finishing, the beam has good integrity, rigidity, toughness and ductility.
Fast speed. Aluminum alloy has the features of light weight and strong rigidity, which is conducive to high-speed movement during processing, and high flexibility is conducive to high-speed cutting of various graphics on the basis of high precision.
High efficiency. The lighter weight beam can ensure the rapid operation of the flatbed laser cutting machine, improve the processing efficiency, and at the same time ensure the processing quality.
Not only can the high-speed operation of the laser cutting machine be guaranteed, but also the accuracy and efficiency of the laser cutting processing.
Effectively improve the service life and accuracy of the cheap laser cutter, reduce time cost and reduce time loss. And after using the same time limit, the aluminum beam can ensure the cutting accuracy to the greatest extent, and at the same time it can alleviate the kinetic energy of laser head during high-speed movement.
The laser head has a built-in motor drive unit, and the focusing lens is driven by a linear mechanism to automatically change the position within 20mm. The user can set continuous focus through the program to complete the rapid perforation of thick plates and automatic cutting of plates of different thicknesses and materials. The compound lens group equipped with D28 integrates the light beam and optimizes the optical and water-cooled design so that the laser head can work stably for a long time.
Flatbed fiber laser cutting machine, equipped with 1000w-12000w fiber laser, can cut 0-25mm thick carbon steel plate, 0-20mm thick stainless steel plate, aluminum plate, 0-12mm thick copper plate, standard working area is 1500*3000mm, can be upgraded It is an independent cabinet with built-in air conditioner for 1500*4500mm, 2000w and above power, and can be installed with a side rotation device to upgrade to a dual-use fiber laser cutting machine.
The 21.5‘ vertical screen display is different from the traditional horizontal screen display. The response speed reaches 8ms, the resolution reaches 1080p, the screen ratio is optimized to 16:9, the power consumption is low, and the control software interface and human browsing habits are better adapted. In addition, it has a high brightness level and low reflectance, and the sturdy glass panel has sturdiness and durability.
Cypcut laser cutting system is a full-featured open-loop control system launched specifically for the sheet metal processing industry.
Support AI, DXF, PLT, Gerber, LXD and other graphic data formats, and accept international standard G codes.
When opening and importing external files, optimization is automatically performed.
Flexible and diverse automatic layout and manual layout sequence functions, a variety of array methods are available.
The powerful material library function allows all process parameters to be saved for the same material to be used again.
Processing breakpoint memory and positioning any point function.
Fixed-height cutting, off-board following and multiple edge-finding methods.
Support remote control of the system via wireless handheld box and Ethernet.
One click to set flight cutting path.
It is easy to install, easy to debug, excellent in performance and complete in plan.It is the fiber laser cutting control system with the highest market share at present.
SIDE ROTATION AXIS
FLOOR-STANDING INDEPENDENT CONTROL CABINET
Dustproof All electrical components and laser sources are built into a separate control cabinet and have a dustproof design to extend the life of the electrical components. The automatic thermostat control cabinet is equipped with air conditioning to achieve automatic constant temperature. This can prevent summer temperatures excessive damage to components.
More professional electrical device assembly, strong electricity separation and weak electricity separation.
Simpler dustproof, anti-static interference, good heat dissipation, easy to maintain.
More convenient and easy to detect circuit faults and maintenance.
Safer and independent of machine equipment, reduce equipment operation interference.
![]() MATERIALS | ![]() CUT | ![]() ENGRAVE | ![]() MARK | ![]() WELD |
Stainless steel sheet | √ | |||
Carbon steel sheet | √ | |||
Aluminum sheet | √ | |||
Copper sheet | √ | |||
Galvanized sheet | √ | |||
Gold sheet | √ | |||
Silver sheet | √ | |||
Nickel plate | √ | |||
Manganese plate | √ |